Bracing Package 24 Pieces

Cross Bracing - Braces - Stability Bracing - Wind Bracing

The bracing package is a complete set for creating 2 crossed bracing cables.

The package includes:

• 1x 20 meters 3mm galvanized steel cable

• 2x turnbuckles M6 3011

• 12x wire clamps 741 - 3mm

• 4x screw eye 4x25

• 4x wire rope thimble 3mm

• 1x cross clamp 3mm

You may order additional individual parts by clicking on the blue links.

Instructions.

STEP 1. Place the screws 3cm from the corners where you want to make the bracing.

STEP 2. Attach the turnbuckles and corners as desired. One per line.

STEP 3. Attach the wire rope thimbles in the opposite corners. You may want to watch this video on how to attach wire rope thimbles.

STEP 4. Unscrew the turnbuckles so that 35mm of the screw thread is exposed on both sides.

STEP 5. Create a loop around the wire thimble and secure it with wire clamps. You may want to watch this video on how to attach wire clamps.

STEP 6. Install the cable fairly tight, then insert a screwdriver into the hole of the turnbuckle and tension your bracing.

STEP 7. Install the cross clamp.

Your bracing is ready!! Congratulations!

A wind bracing or stability bracing is made by bracing two cables. This strengthens the