Looking for stainless steel pipe clamps to secure pipes and tubing? At Staalkabelstunter, you can find a range of two-piece pipe clamps manufactured from AISI 304 stainless steel. Our clamps are available in ten different sizes and feature an integrated M8 or M10 threaded nut for connecting to a suitable threaded rod or fixing point.
These stainless steel pipe clamps are designed for fixing various types of pipework, including stainless steel pipes, steel pipes, water pipes, heating pipes and compressed air lines. The two-piece construction allows the clamp to be positioned around an existing pipe, while the integrated threaded connection provides a practical mounting solution.
A two-piece stainless steel pipe clamp provides a practical way to secure pipework to walls, ceilings and other suitable supporting structures.
The correct clamp size depends on the outside diameter of the pipe. Measure the pipe diameter in millimetres and select a clamp with a corresponding clamping range.
Remember that inch-based pipe sizes are often nominal designations. They do not necessarily represent the actual outside diameter of a pipe. For example, a nominal 1 1/4" steel pipe typically has an outside diameter of approximately 42.4 mm and fits within the 38-45 mm clamp range.
| Clamping range | Common nominal pipe size | Connection thread |
|---|---|---|
| 16-24 mm | 3/8" | M8 |
| 20-27 mm | 1/2" | M8 |
| 25-31 mm | 3/4" | M8 |
| 30-37 mm | 1" | M8 |
| 38-45 mm | 1 1/4" | M8 |
| 45-52 mm | 1 1/2" | M8 |
| 55-62 mm | 2" | M8 |
| 70-77 mm | 2 1/2" | M10 |
| 84-90 mm | 3" | M10 |
| 110-116 mm | 4" | M10 |
The inch values are nominal references only. Always use the actual outside diameter in millimetres when selecting a pipe clamp.
Our stainless steel pipe clamps with threaded nuts are designed for attachment to compatible threaded rods or other suitable fixing points. The integrated nut makes them suitable for mounting pipework along walls or below ceilings.
The seven smaller sizes, covering clamping ranges from 16-24 mm up to 55-62 mm, feature an M8 threaded connection. These versions are suitable for various smaller and medium-sized pipe diameters.
The three larger sizes, 70-77 mm, 84-90 mm and 110-116 mm, feature an M10 threaded connection. These clamps provide a mounting option for larger pipe diameters when used with suitable M10 fixings.
M8 and M10 refer to the size of the mounting thread, not the diameter of the pipe.
These stainless steel pipe fixing clamps can be used in a variety of installations where pipes need to be secured to a supporting structure.
Our pipe clamps are manufactured from AISI 304 stainless steel, a commonly used stainless steel grade offering good corrosion resistance in many ordinary indoor and outdoor environments.
For installations exposed to seawater, high salt concentrations or aggressive chemicals, a different stainless steel grade may be required. Always consider the environmental conditions when selecting the material.
The required fixing arrangement and spacing between pipe clamps depend on factors such as pipe weight, pipe contents, supporting structure and the intended application.
A two-piece pipe clamp consists of two curved sections connected with bolts. This allows the clamp to be placed around a pipe and secured to a suitable supporting structure.
For a pipe with an actual outside diameter of 42 mm, select the stainless steel pipe clamp with a 38-45 mm clamping range.
M8 and M10 indicate the internal thread size of the integrated mounting nut. The pipe size is specified separately by the clamping range in millimetres.
Yes. The two-piece pipe clamps are supplied with two bolts for connecting the clamp sections.
AISI 304 stainless steel is suitable for many normal outdoor applications. In highly saline or chemically aggressive environments, material suitability should be checked separately.
Yes. The M8 or M10 threaded connection allows the clamp to be attached to a compatible threaded rod or other suitable fixing arrangement. The complete installation must be appropriate for the expected load.
At Staalkabelstunter, you can choose from ten sizes of stainless steel pipe clamps for fixing pipes and tubing. Compare the available clamping ranges, select the correct M8 or M10 threaded connection and find the right clamp for your installation.
Need help selecting the correct size? Contact Staalkabelstunter for assistance with choosing a suitable stainless steel pipe clamp.
```
Tensioner
Thimble
Carabiner Hooks
Eyes
Shackle
Hardware
Hooks
Pulleys
Spring clamps
Screws
Rings
Stainless Steel Pipe Clamps
