Looking for a cable tray suspension system or a way to suspend a profile below the ceiling? This category includes wire rope suspension systems for mounting, positioning and adjusting cable trays, profiles and similar structures. Choose from complete suspension kits and different configurations with cable grippers, hooks, clips and other connection types.
Wire rope suspension is particularly useful when a structure needs to be installed below the ceiling or accurately adjusted to a specific height. The correct system depends on the cable tray or profile, its available fixing points, the supporting ceiling structure and the total load.
In a suspended cable tray installation, the wire rope connects the ceiling fixing to the tray or its supporting structure. Depending on the system, the lower connection may use a hook, clip, loop or another suitable attachment.
An adjustable cable tray hanging system with a cable gripper allows the suspension height to be fine-tuned during installation. This makes it easier to level several suspension points and accurately align the cable tray.
The same suspension principle can be used for profiles with suitable fixing points. It can be a practical solution for profiles, rails and other lightweight structures that need to be positioned below a ceiling.
Always check the manufacturer's specified fixing method for the profile. A hook, clip or other connection must mechanically match the fixing point and be suitable for the load of the complete installation.
The range contains different types of wire rope suspension systems. Complete kits combine several components required for ceiling suspension, while other versions use hooks, spring clips, snap-hook connections or self-locking cable grippers.
This allows the suspension system to be matched to the structure being installed. Where a cable tray or profile already has a suitable eye, slot or attachment point, a hook or clip system may provide a practical connection. Other installations may require a threaded fitting or a different gripper arrangement.
Many systems use a self-locking cable gripper. The wire rope is fed through the gripper and secured at the required position. With suitable adjustable versions, the height can be corrected again after initial installation.
This makes it easier to level multiple suspension points. Accurate positioning is especially important on longer cable trays and profiles, which should always be supported in accordance with the manufacturer's installation requirements.
The required wire rope length is determined mainly by the distance between the ceiling and the intended position of the cable tray or profile. The physical length of the cable tray does not determine the required suspension cable length.
Choose enough wire rope for both the required drop and final adjustment. Available systems can differ in cable length, so always compare the product specification with the planned suspension height.
Before ordering, check:
The allowable load depends on the complete installation rather than the wire rope alone. The ceiling fixing, wire rope, cable gripper, end fitting and connection to the cable tray or profile must all be suitable for the application. Always follow the support and installation instructions provided by the cable tray or profile manufacturer.
Browse the suspension systems above and compare connection type, wire rope diameter, cable length, adjustability and permitted load. The different configurations make it possible to select a system that matches your cable tray, profile and ceiling installation.
Not sure which cable gripper, hook or suspension kit you need? Contact us and we will be happy to help you choose a suitable wire rope suspension system for your application.
Use a suspension system with a ceiling fixing, wire rope and lower connection that are suitable for the cable tray and its load. Depending on the tray design, the connection may use a hook, clip or another compatible attachment.
An adjustable cable gripper allows the drop height to be fine-tuned during installation. This makes it easier to level multiple suspension points and position a cable tray or profile accurately.
The correct diameter depends on the selected suspension system and its load requirements. Only use wire rope sizes that are compatible with the cable gripper and other system components, and check the permitted load of the complete assembly.
The required length is determined mainly by the distance between the ceiling and the cable tray or profile. Allow sufficient extra length for adjustment and check the cable length supplied with the selected suspension kit.
Yes, provided that the connection type, fixing method and permitted load are suitable for both applications. Always check the available fixing points and manufacturer's mounting instructions first.
The required number and spacing depend on the cable tray design, loading and manufacturer's specifications. Follow the support spacing specified for the particular cable tray system rather than using one universal distance.
With an adjustable cable gripper system, this is generally possible. Check the individual product specification to confirm how the gripper is operated and whether it is intended for adjustment after installation.
Compare the total weight of the cable tray, profile, installed cables and any additional load with the permitted load of the complete suspension system. The ceiling fixing and load capacity of the supporting structure must also be taken into account.
Light
LED & Infrared
Acoustic Panels
Signs & Displays
Custom Made
Cable Trays & Profiles
Shelves & Racks
System Grippers
Hanging cables
Wine Racks
