Bracing bundle for stork's nest 34 pieces

Stork's nest - Cross bracing - braces - stability bracing - wind bracing

The Stork Nest Bracing Bundle is a package especially assembled for making braces when building your own stork's nest.

The package contains the following items:

• 1x 20 meter 6mm galvanized steel cable
• 3x wire tensioners M10 3011
• 18x wire clamps 741 - 6mm
• 6x screw eyes 8x130
• 6x wire sleeve 6mm

You can also order separate parts by clicking on the blue links.

Instructions for use.
STEP 1. Place the screws 3cm from the corners where you want to make the brace.

STEP 2. Attach the wire tensioners and the corners you want. 1 per line.

STEP 3. Attach the wire stockings in the opposite corners. You may want to watch this film about attaching the wire stockings. 

STEP 4. Unscrew the wire strainers so that 35 mm of thread sticks out on both sides.

STEP 5. Make a loop around the wire sleeve and secure it with the wire clips. You may want to watch this film about attaching wire clips.

STEP 6. Mount the cable reasonably tight, then put a screwdriver in the hole of the wire tightener and bring your brace to tension.

STEP 7. Mount the cross clamp.