Duplex wire rope clips 4 mm with nuts for steel cable

These duplex wire rope clips 4 mm are suitable for steel cable with a thickness of 4 mm. You can use the cable clips to secure the steel cable in a loop.

The clip consists of bolts, nuts and a cover plate. By loosening the nuts, you can insert the steel cable and then secure the connection.

Key features

• Size: suitable for steel cable with a thickness of 4 mm.
• Design: duplex wire rope clip with two fastening points.
• Fastening: fitted with bolts, nuts and a cover plate.
• Installation: opens by loosening the nuts.
• Application: intended for creating and securing a loop in steel cable.

What are duplex wire rope clips 4 mm used for?

You can use these duplex wire rope clips to secure a loop in steel cable with a diameter of 4 mm. The cable is placed under the cover plate and clamped in position with the nuts.

How do you install the duplex wire rope clip?

1. Loosen the nuts on the duplex wire rope clip.
2. Remove the cover plate.
3. Bend the steel cable into the required loop.
4. Place both sections of the steel cable in the duplex clip.
5. Replace the cover plate and tighten the nuts evenly and securely.

Frequently asked questions

What is a duplex wire rope clip?

A duplex wire rope clip is a cable clamp used to secure two sections of steel cable next to each other. This allows you to create a loop in the cable.

What cable thickness is this clip suitable for?

This duplex wire rope clip is suitable for steel cable with a thickness of 4 mm. Use a clip size that matches the diameter of the cable.

How is the steel cable placed in the clip?

First loosen the nuts and remove the cover plate. Then place both cable sections in the clip, replace the plate and tighten the nuts.

What can I use this wire rope clip for?

You can use the wire rope clip to create a loop in 4 mm steel cable. Its suitability for a specific application also depends on the cable used and the applied load.

Can the duplex wire rope clip be reused?

The clip can be loosened and installed again. Before reuse, always check that the clip, bolts and nuts are not damaged.

How tightly should the nuts be fastened?

Tighten the nuts evenly and securely so that both sections of the steel cable are firmly clamped. No specific tightening torque has been provided.

Need advice?

Would you like to know whether this duplex wire rope clip is suitable for your application? Please contact our customer service team. We will be happy to help you choose the correct size or version.