Gripple HangPro 2 Wire Suspension Kit with M8 Threaded Stud – 2 m – 55 kg

With the Gripple HangPro 2 wire suspension system, building services, cable trays, lighting and ventilation ducts can be suspended quickly and accurately at the required height without special tools. This professional suspension system combines a 2 m galvanised steel wire rope with a diameter of 2 mm, an M8 threaded stud end fixing (EF8) and a self-locking HangPro 2 wire hanger with dual release buttons.

The HangPro 2 has a manufacturer-specified safe working load of 55 kg and a safety factor of 5:1. Thanks to its integrated release buttons, the suspension height can be easily readjusted after installation, provided the load is supported during adjustment.

Benefits of the Gripple HangPro 2

• Safe working load: 55 kg according to Gripple.
• Safety factor of 5:1: as specified by the manufacturer.
• Quick installation: easy assembly without special tools for the wire hanger.
• Continuously adjustable: precise adjustment of suspension height.
• Dual release buttons: integrated push buttons for wire rope readjustment.
• Patented wire entry gate: helps guide the wire rope correctly into the hanger.
• Complete suspension kit: including M8 threaded stud, wire rope and HangPro 2 wire hanger.
• Traceability: each wire hanger has a unique batch number.

What Is Included?

The Gripple HP2-S8G-2M suspension kit consists of:

• 1 x Gripple HangPro 2 self-locking wire hanger with dual release buttons.
• 1 x galvanised steel wire rope, 2 mm diameter and 2000 mm length.
• 1 x M8 threaded stud end fixing (EF8), factory-fitted to the wire rope.

Installation: How Does the HangPro 2 Wire Hanger Work?

The HangPro 2 allows an adjustable suspension loop to be formed. The wire rope passes through two separate channels in the hanger and locks automatically.

1. Secure the M8 threaded stud to a suitable fixing point.
2. Insert the wire rope through the entry channel of the HangPro 2 wire hanger.
3. Guide the wire rope around or through the fixing point of the object to be suspended.
4. Feed the wire rope back through the opposite channel of the hanger.
5. The loop locks automatically. Adjust the suspension to the required height.
6. To readjust the height, first support the load, press the release button and make the required adjustment.
7. Always leave at least 100 mm of wire rope extending beyond the hanger.

Important: Always follow Gripple's current installation instructions. The complete suspension assembly, including fixing points and supporting structure, must be suitable for the intended load.

Technical Specifications – Gripple HP2-S8G-2M

HangPro 2 Wire Hanger Dimensions

The technical drawing below shows the dimensions of the HangPro 2 wire hanger. Its compact housing features two independent wire channels and integrated release buttons.

HangPro 2 Materials and Construction

The HangPro 2 wire hanger is manufactured using different materials selected for their mechanical function and durability.

• Housing: zinc alloy (ZL2).
• Release buttons: nylon.
• Locking wedge: sintered steel.
• End caps: polypropylene.
• Springs: stainless steel.

Wire Rope Compatibility and Operating Conditions

According to Gripple, the HangPro 2 is designed for wire rope with specific characteristics relating to diameter, construction and material properties.

• Suitable for 2.0 mm diameter wire rope.
• Specified wire rope construction: 7x7.
• Nominal wire rope tensile strength: 1960 MPa.
• Use only with pre-galvanised Class B wire rope manufactured to BS EN 12385.
• Maximum included wire angle: 60°.
• Minimum protruding wire rope tail: 100 mm.
• Operating temperature range: -20 °C to +70 °C.
• Corrosion classification: C1 indoor and C2 indoor.

These specifications are taken from the HangPro 2 technical documentation. Only use the wire rope type specified by Gripple and follow the manufacturer's installation requirements.

Gripple Testing and Technical Documentation

Gripple supports the performance of its suspension systems with technical documentation and independent testing. Its product literature references organisations including Lloyd's Register, APAVE, TÜV and ITB in connection with testing and certification of relevant Gripple products and fixing systems.

For the HangPro 2, Gripple has also published a Declaration of Performance specifying a load-bearing capacity of 55 kg with a safety factor of 5:1 under EN 13964:2014 for the application described in that declaration.

The stated tests and certifications apply to the relevant Gripple products within the scope of their supporting documents. They do not automatically certify every complete installed suspension assembly.

Typical Applications

The HangPro range has been developed for professional installation work, including:

• Electrical installations: suspending cable trays, wire mesh cable baskets and electrical systems.
• Pipework: supporting suitable technical pipe installations.
• Ventilation: suspending ventilation ducts and components.
• Cooling systems: installation of suitable system components.
• Lighting: suspending and precisely adjusting lighting fixtures.
• Interiors and displays: suspending acoustic panels and signage.

Frequently Asked Questions About Gripple HangPro 2

What is the safe working load of the HangPro 2?

Gripple specifies a safe working load of 55 kg for the HangPro 2, with a safety factor of 5:1. This is the working load, not the breaking load.

Can the height be adjusted after the system is loaded?

Yes. First support the load, then use the integrated release buttons to adjust the wire rope length. Do not release the wire hanger while the load is hanging freely without support.

Which wire rope is included?

This version includes a 2 m galvanised steel wire rope with a diameter of 2 mm, suitable for the HangPro 2 wire hanger.

What does the EF8 end fixing mean?

EF8 is Gripple's designation for the M8 threaded stud end fixing. It is used to attach the suspension wire rope to a suitable fixing point.

Can any 2 mm wire rope be used?

No. Gripple specifies particular wire rope characteristics for the HangPro 2, including 7x7 construction, pre-galvanised Class B wire rope and a nominal tensile strength of 1960 MPa.

Buy Gripple HangPro 2 at Staalkabelstunter

With the Gripple HangPro 2 HP2-S8G-2M, you choose a complete, precisely adjustable wire suspension kit with an M8 threaded stud end fixing. The combination of a 2 m wire rope, self-locking wire hanger and 55 kg safe working load provides a practical solution for a wide range of professional suspension applications.