With Hangpro, you can hang your products quickly and easily at height – even when the cable is already under load. Create a certified connection fast and without tools. Professionals already appreciate the time savings.

The Hangpro set includes:

• 1 Hangpro2 wire clamp – double-button
• 1 steel wire 2 mm – 1 meter long

Installation:

1. Insert the wire rope through the insertion channel.
2. Loop the wire around the object and feed it back through the opposite channel.
3. The loop is now secure.
4. To adjust height, support the load, press the button to release the wire and make adjustments.
5. Ensure at least 10 cm of tail wire exits the clamp.

Performance:

Safe working load: 55 kg
Safety factor: 5:1
Operating temperature range: −20 °C to +70 °C

Material
Housing – Zinc Alloy (ZL2)
Buttons – Nylon
Wedge – Sintered Steel
End Caps – Polypropylene
Springs – Stainless Steel

Compatibility
Wire Diameter – 2.0 mm
Wire Nominal Tensile Strength – 1960 MPa
For use only with 7×7 construction, pre-galvanised Class B wire rope manufactured to BS EN 12385
Wire Construction – 7×7
Maximum Angle – 60°
Minimum Tail Wire Length – 100 mm
Corrosion Classification – C1 indoor and C2 indoor