Threaded Grip Suspension System

This threaded grip system is the solution for hanging particleboard, plywood, and multiplex panels. With its screw-in anchor, you can quickly mount at the exact height.

• Minimum board thickness from 22 mm
• Maximum board thickness up to 30 mm
• Can be used vertically or horizontally
• Load capacity of 10 kg per mounting point
• Innovative easy-grip system for quick adjustments
• Designed for steel cables of 1 and 1.2 mm thickness
• Floating shelf installation possible
  
  Installation instructions:
• Drill a 10 mm hole with a wood drill bit. Pre-drilling with a smaller bit is possible for precise results.
• Screw the gold-colored section into the board from underneath using an 8 mm Allen key.
• Continue screwing until the gold-colored section is fully embedded in the board.
• Now screw the grip system into the anchor from above.
• Thread the cable through the system until the shelf is level. Use a spirit level or your smartphone for precision.
• Wall mounting is possible but not required.

Stylish and functional shelving system | Threaded Grip Suspension System