Professional Cabere G21 Drain Cleaning Snake 8 mm x 7.5 m

• High-quality spring steel
• Can be operated by hand or with a drill/cordless screwdriver
• Clean and hygienic storage
• Cabere: professional-quality drain cleaning equipment
• 7.5 m drain cleaning snake for stubborn blockages

Robust drain cleaning tool with a durable, rust-resistant coating and rotating metal drum. The design of the drum allows the spring steel cleaning snake to be stored conveniently and hygienically. Cabere specialises in high-quality drain cleaning snakes for the professional market and offers a practical DIY solution that can help save the cost of calling a professional drain cleaning service.

Snake 8 mm ø x 7.5 m for drains up to 40 mm

The G21 can be operated either by hand or with a drill or cordless screwdriver.
The snake can be completely removed from the drum for cleaning.

Instructions for use:

Attach a drill or cordless screwdriver to the G21 – preferably one with variable speed control. Make sure that the power tool is earthed or double insulated. Loosen the wing nut. Feed the spiral head through the drain strainer and push the snake into the drain pipe until it reaches the blockage. If the spiral head cannot pass through the strainer, use the other, straight end of the snake. Then tighten the wing nut and rotate the snake clockwise at a low speed. Apply light pressure until the exposed section of the snake enters the drain pipe. Loosen the wing nut and pull the drain cleaner back approximately 15 cm. Repeat this procedure until the drain is clear. Do not overload the snake. Let the spiral head do the work!

Frequently asked questions:

FAQ: I have pulled the snake completely out of the drum. What should I do?
Answer: Follow the instruction video – the snake can easily be reinserted. Video: how to put the snake back into the G21