Hanging kit 4 is a super handy kit to hang up anything quickly and with just a few actions and minimal tools.

The steel cable has a thickness of 1.2mm and a length of 1.2 metres

Maximum weight: 10 kg

.

Test your construction by slightly overloading it during installation.

(this is a static weight, no rights can be derived from it)

The set consists of 3 parts:

1. The rosette for ceiling mounting.

2. The steel cable for hanging at the right height

3. The hook with self-clamp.

The self-clamping mechanism allows you to flexibly correct the height before and after hanging up.

Step 1:

- You determine the right place for the rosette before installation. To do this, use the 3 holes in the rosette.

Step 2:

- This is where you attach the steel cable in the rosette, blocking the soldering end in the rosette.

Step 3:

- Then take the hook with the self-clamp and pull the other end of the wire rope through the self-clamp. Pierce the cable all the way through so that it passes through the eye of the self-clamp. Then pull the cable through to the desired length.

The steel wire rope can be easily released from the self-clamp by lying down and pressing the cable holder.